| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Pre-bent fret wire http://www-.luthiersforum.com/forum/viewtopic.php?f=10137&t=47523 |
Page 1 of 1 |
| Author: | Finn.t.guitar56 [ Sun Mar 27, 2016 1:47 pm ] |
| Post subject: | Pre-bent fret wire |
Anyone know the best place to get pre-bent fret wire in fairly short lengths? (2ft-4ft) Thanks -Finn |
|
| Author: | Rocky Road [ Sun Mar 27, 2016 9:40 pm ] |
| Post subject: | Pre-bent fret wire |
Try Allen Guitars. Com Dave. Sent from my iPhone using Tapatalk I want to add that the wire is cut off rolls to a length you specify. I have found that the curve of the wire is right for a 12 - 16" radius fret board. I bought a roll of it from Allen Guitars. |
|
| Author: | Tom West [ Thu Apr 21, 2016 1:30 pm ] |
| Post subject: | Re: Pre-bent fret wire |
Finn: LMI sells it's fret wire rolled. One piece is more then enough for a fret job. Tom |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|